Wet wall cavities behind stucco
We use a boroscope inspection camera to find water behind stucco, then set air movers and dehumidifiers to dry the cavity. If the stucco has to be opened, we do it in a controlled way and document it for your claim.
24/7 fire water damage cleanup in Sylmar, California
Water damage remediation after fire in Sylmar, California
When a fire leaves behind water, soot, and soaked framing, water damage remediation after fire in Sylmar, California, is the only way to stop mold and rot. We handle fire water damage cleanup in Sylmar for homes and businesses, from Foothill Boulevard bungalows to Sylmar Industrial District warehouses. Call (833) 321-7153 and we roll a truck today.
Careful work. Honest options.
About this service
What water damage remediation after fire in Sylmar, California involves
water damage remediation after fire in Sylmar, California, is the process of extracting firefighting water, drying structural cavities, and neutralizing smoke and soot residue so a burned building can be rebuilt instead of demolished. It starts with a moisture meter and thermal imaging camera to map hidden saturation behind drywall, then moves to truck-mounted extraction and industrial air movers. We treat every job as a race against mold, which can colonize wet framing in 24 to 48 hours.
Sylmar sits in a high-wind corridor where the Sayre Fire and Saddleridge Fire both forced mass evacuations, and the same dry Santa Ana winds that feed flames also dry out a soaked structure unevenly. That swing between wet and dry cracks stucco, warps subflooring, and pushes moisture into crawl spaces. If you search for water damage remediation after fire near me Sylmar after a kitchen fire or roof leak, you need a crew that understands both fire and water. We also handle affordable water damage remediation after fire Sylmar California for homeowners filing claims.
- ✓ Stop mold in 48 hours
- ✓ Save the rebuild
- ✓ Handle the insurance paperwork
- ✓ Work around your schedule
What's included
What water damage remediation after fire includes
Every fire loss is different, but our standard scope covers the water and moisture side of the cleanup. Here is what is included when you hire us for water damage remediation after fire in Sylmar, California. If your job needs reconstruction or contents cleaning, we can coordinate that too.
✓
Emergency water extraction
We remove standing water from floors, carpet, and crawl spaces using truck-mounted extraction and wet/dry vacuums. This happens on the first visit, usually within 60 to 90 minutes of your call.
✓
Moisture mapping and documentation
We use a moisture meter, thermal imaging camera, and hygrometer to map wet areas and record readings. You get a written report with photos for your insurance claim.
✓
Structural drying setup
Industrial air movers, dehumidifiers, and air scrubbers are placed to dry framing, drywall, and subflooring. We monitor daily and adjust equipment until readings match dry standard.
✓
Antimicrobial treatment
Wet cavities are treated with antimicrobial solution to inhibit mold growth. This is especially important in Sylmar homes where firefighting water sits in wall cavities for days.
✓
Debris and soot removal
We remove charred material, soaked insulation, and carpet pad that cannot be dried. Soot residue on framing is cleaned so it does not affect the rebuild or air quality.
How it works
Our water damage remediation after fire process
01
Emergency call
You call (833) 321-7153 and describe the fire, the water, and the address. We ask about the power status, the roof condition, and whether the fire department already shut off the gas. A crew is dispatched with extraction equipment and drying gear loaded, usually arriving within 60 to 90 minutes across Sylmar.
02
Inspection and mapping
We walk the structure with a moisture meter, thermal imaging camera, and boroscope inspection camera to find water behind walls and under floors. You get a written scope with room-by-room readings before any equipment is placed. This step takes 45 to 90 minutes on a typical 1,500-square-foot home.
03
Water extraction
Truck-mounted extraction pulls standing water from carpet, pad, and hard flooring. We use wet/dry vacuum units and sump pumps in basements and crawl spaces where water pools. A flooded 1,200-square-foot area usually takes two to four hours to extract.
04
Structural drying
We set industrial air movers, dehumidifiers, and air scrubbers to dry framing, drywall, and subflooring. Negative air machines keep soot and mold spores from spreading into clean rooms. Drying typically runs three to five days, and we check readings daily with a hygrometer.
05
Final verification
We do not pull equipment until moisture content matches dry standard for the material. You get a final report with photos and readings for your insurance file. If any area is still wet, the gear stays another day at no extra charge.
Tools & methods
Tools and methods we use
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Thermal imaging camera
Finds hidden moisture behind walls, under floors, and in ceilings without opening up the structure. We use it on every initial inspection.
Moisture meter and hygrometer
Measures moisture content in framing, drywall, and subflooring, and tracks relative humidity in the air. We record readings daily to confirm drying progress.
Truck-mounted water extraction machine
Pulls standing water from carpet, pad, and hard floors at high volume. It is the fastest way to remove water before drying equipment is set.
Industrial air mover and dehumidifier
Moves air across wet surfaces and removes moisture from the air. We use Dri-Eaz and Phoenix Restoration Equipment units on most jobs.
Air scrubber and negative air machine
Filters airborne soot and mold spores and keeps them from spreading into clean rooms. Essential after a fire when smoke residue is present.
Boroscope inspection camera
Lets us see inside wall cavities and crawl spaces without cutting large openings. We use it to confirm water behind stucco and under cabinets.
Sump pump and wet/dry vacuum
Removes water from basements, crawl spaces, and other low areas where truck-mounted extraction cannot reach. We keep both on every truck.
Real results
Before and after.
Kitchen fire on Astoria Street
Before
A stove fire was put out with a hose, leaving about an inch of water on the kitchen floor and soaked cabinets. The homeowner was worried about mold and cabinet replacement.
After
We extracted the water in two hours, dried the cabinets and subfloor in three days, and verified with a moisture meter. The cabinets were saved, and the insurance claim covered extraction and drying.
Roof fire on Bledsoe Street
Before
A roof fire damaged the attic, and hose water soaked the insulation and framing. The homeowner called us two days later when a musty smell appeared.
After
We removed the wet insulation, treated the framing with antimicrobial solution, and dried the attic in four days. The musty smell was gone, and the roof repair could proceed without mold remediation.
Warehouse sprinkler discharge
Before
A small fire in a Sylmar Industrial District warehouse triggered sprinklers that soaked 3,000 square feet of concrete and inventory. The business needed to reopen quickly.
After
We extracted the water over a weekend, set large dehumidifiers and air scrubbers, and had the floor dry in five days. The business reopened Monday without replacing the concrete slab.
Problems we solve
Problems we solve after a fire in Sylmar
Fire damage rarely travels alone. These are the water and moisture problems we see most often after a Sylmar fire, and how we handle them.
Ask a pro →↗
Flooded crawl space after firefighting
We pump and extract the standing water, then place dehumidifiers and air movers in the crawl space. We treat joists with antimicrobial solution and verify dryness with a moisture meter before closing it up.
Sewage backup during fire loss
We treat sewage backup as a contaminated water loss. That means protective gear, removal of affected material, disinfection with antimicrobial solution, and drying only after the area is clean.
Ceiling water stains and sagging drywall
We locate the source, extract standing water, and dry the ceiling cavity. Drywall that has lost structural integrity is removed and documented so your rebuild scope is accurate.
Proof you can check
Licensed, certified, and reviewed
✓
IICRC WRT (Water Restoration Technician)IICRC
✓
IICRC ASD (Applied Structural Drying)IICRC
✓
IICRC AMRT (Applied Microbial Remediation Technician)IICRC
✓
EPA Lead-Safe Certified FirmU.S. EPA
✓
California State Contractor LicenseCalifornia Contractors State License Board
Most residential water damage remediation after fire in Sylmar, California, runs $2,500 to $8,000 depending on square footage, water category, and how much material has to be removed. A single-room kitchen fire with minor water might land near $2,500, while a whole-house loss with crawl space flooding can exceed $8,000. We provide a written scope before work begins so you know the number.
It is the cleanup and drying phase that happens after firefighters put out a fire. We extract the water left by hoses and sprinklers, dry the framing and subflooring, and treat smoke and soot residue. Without it, wet drywall and insulation grow mold in 24 to 48 hours. The goal is to make the structure safe and dry so your rebuild can start.
Extraction takes two to four hours on a typical room. Structural drying runs three to five days for most Sylmar homes, and we check moisture daily. Larger losses with crawl space flooding or sewage backup can take seven to ten days. We do not pull equipment until readings match dry standard, and we tell you the expected timeline on day one.
Yes, when it is done within the first 24 to 48 hours. We extract standing water, apply antimicrobial solution to wet cavities, and dry the structure below mold-growth thresholds. If mold already started, we handle that too. Our IICRC AMRT-trained techs treat affected framing and insulation so you are not dealing with a second problem after the fire.
More services
Related Services
flood restoration servicesWhen firefighting water floods a Sylmar basement or crawl space, our flood restoration services pump it out and dry the structure. We handle the same equipment and documentation as a fire loss, so your insurance claim stays consistent.Explore →
emergency water removalEmergency water removal is the first step of water damage remediation after fire in Sylmar. We pull standing water with truck-mounted extraction and wet/dry vacuums before it reaches the subflooring or slab.Explore →
mold remediation after water damageIf a fire loss sat wet for more than 48 hours, mold remediation after water damage may be needed. We treat affected drywall, insulation, and framing with antimicrobial solution and remove material that cannot be saved.Explore →
water leak restorationFire can damage supply lines and sprinkler pipes, causing a water leak restoration job on top of the fire cleanup. We locate the leak, repair or isolate the line, and dry the surrounding structure.Explore →
emergency water cleanupEmergency water cleanup covers the immediate response after a fire is out. We remove water, debris, and soot from floors and walls, then set drying equipment so the structure does not stay wet overnight.Explore →
water extractionWater extraction is the mechanical removal of standing water using truck-mounted units and sump pumps. It is the fastest way to reduce moisture load before drying begins, and it is included in every fire water damage cleanup Sylmar job.Explore →
water damage mitigationWater damage mitigation means stopping further damage before it spreads. After a fire, we board up openings, tarp roofs, and isolate wet areas so rain and humidity do not add to the problem.Explore →
toilet overflow cleanupA fire can damage plumbing fixtures, and a toilet overflow cleanup may be needed alongside fire water damage cleanup. We treat the water as contaminated when necessary and disinfect the area before drying.Explore → Ready when you are
Call now for water damage remediation after fire in Sylmar, California
Every hour a wet structure sits, mold gets closer. We are licensed, insured, and dispatch 24/7 from Sylmar. Call (833) 321-7153 and we will tell you exactly when the crew arrives and what the drying will involve.
Call (833) 321-7153 (833) 321-7153 →
Request an appointment
Contact Water Damage Restoration Sylmar
Call us 24/7 at (833) 321-7153 for emergency water damage restoration in Sylmar. We respond within 60 minutes. You can also email us at info@waterdamagerestorationsylmar.com or visit our office. We're here to help you recover fast.
Call anytime(833) 321-7153Email the officeinfo@waterdamagerestorationsylmarca.shop
Office hoursOpen 24 hours · 7 days a week